TPS injection molding series
The TPS injection molding series is a thermoplastic elastomer made by physical blending of SEBS/PP as the main material. The material has excellent elasticity and durability, a wide range of hardness, comfortable touch, and can maintain stable performance in high and low temperature environments. The processing method is mainly injection molding, with a short molding cycle and recyclable scraps. Widely used in the fields of automotive parts injection molding, glass edge injection molding, front and rear gear edge strips, guide grooves, etc., it has the advantages of environmental protection, recyclability, and high processing efficiency.
Product Details
| Grade | Density (g/cm³) | Hardness (Shore A/D) | Tensile Strength (MPa) | Elongation at Break (%) | Tear Strength (kN/m) | Compression Set (%) |
|---|---|---|---|---|---|---|
| HS8155 | 0.96 ± 0.05 | 55 ± 5 A | ≥ 4.0 | ≥ 300 | ≥ 20 | ≤ 50 |
| HS8161 | 0.98 ± 0.03 | 65 ± 5 A | ≥ 5.0 | ≥ 400 | ≥ 20 | ≤ 60 |
| HS8170 | 0.92 ± 0.03 | 70 ± 5 A | ≥ 5.0 | ≥ 400 | ≥ 20 | ≤ 60 |
| HS8185 | 1.01 ± 0.03 | 85 ± 5 A | ≥ 10.0 | ≥ 400 | ≥ 30 | ≤ 60 |
CONTACT US
Deeply cultivate the field of polymer materials and provide one-stop solutions